Our electrical installation service in Talke covers new sockets, showers, kitchens, extensions and garden rooms. Every job is tested and certified, and the quote is free.
Here is what each type of installation involves. Tap a service to see the full details.
Any new wiring, from a single extra circuit to a complete set of sockets and lights for a converted room. We plan cable routes before we start, so the finished work is neat and easy to use. Read how a typical installation is put together.
More about electrical installationA loose socket, a scorched faceplate or a switch that crackles should be looked at straight away. We find out why it failed, replace the fitting and check the circuit behind it. Homes around Talke often have older fittings, so see what we check.
More about electrical socket and switch repairA backup generator needs to be wired through a proper changeover switch, so it can never feed power back into the grid. We fit the switch and the inlet and label everything clearly for when the power goes. Find out how generator wiring is done safely.
More about generator wiringAn electric shower draws a lot of current, so it needs its own circuit with the right cable size and RCD protection. Swapping like for like is simpler than a first-time fit. See how we work out whether your supply can take the shower you want.
More about electric shower installationA kitchen refit is the best time to move sockets, add a circuit for the oven and plan lighting under the wall units. We work alongside your kitchen fitter in Talke so the wiring is in place before the units go on. Read how we plan kitchen electrics.
More about kitchen electrical installationAn extension needs sockets, lighting and often heating wired in at the right stage of the build. We fit the first fix while the walls are open, come back for the second fix and provide the certificate building control asks for. See how we fit around your builder.
More about extension electrical workPower for a garden office, workshop or shed usually runs through buried armoured cable from the house, with its own protection at both ends. We size the cable for what you plan to use out there. Find out what a garden room supply involves.
More about garden room & outbuilding electricsLarge induction hobs and range cookers often need a dedicated circuit, while smaller hobs can run from a standard supply. We check the rating on your appliance, wire it to a cooker switch and test it before you start cooking. See what a cooker install needs.
More about cooker & hob installationNew circuits and most changes in kitchens, bathrooms and outbuildings have to meet the wiring regulations and be signed off. Use a registered contractor who can certify the work, so you are not left chasing paperwork when you sell the house.
Allpower Solutions Limited is an NICEIC Approved Contractor that has been in business for 30 years. We test every installation before we leave, give you the certificate and register notifiable work for you.
Tell us what you need or what has gone wrong. We aim to respond the same day across Stoke-on-Trent.
We look at the job, explain what needs doing and give you a free quote before any work starts.
We finish the job, test everything we have worked on and hand over the certificate for your records.
New circuits, a new consumer unit and work in some special locations are notifiable under Part P. As an NICEIC Approved Contractor, we register that work with building control for you, and you receive a compliance certificate in the post. Minor additions to an existing circuit usually do not need notifying.
Yes. We can fit our work around builders, kitchen fitters and plasterers. We agree the layout with you at the start, fit the cables while the walls and floors are open, then return to fit sockets, switches and lights once the decorating is nearly done.
Usually very little. Adding sockets or a new circuit often takes a day or less, and the power is only off while we connect to the consumer unit. We use dust sheets, tidy up as we go and tell you when the power will be off.
Yes. We install new circuits, sockets and lighting in shops, offices and workshops across Kidsgrove, Stoke-on-Trent and the nearby towns. We plan the work with you beforehand, so the areas you need stay usable, and certify everything when the installation is finished.
We're based in Talke and install electrics across the surrounding area. Choose your town below.
Tell us what you want to add or change and we'll arrange a visit and a free quote.
